WE RECOMMEND THESE EXCELLENT MISCELLANEOUS BOOKS WHERE YOU CAN ORDER ONLINE FROM AMAZON.COM - JUST CLICK ON THE LINK BELOW : -
High Speed Digital Design: A Handbook of Black Magic
@ US$89.00
Focused on the field of knowledge lying between digital and analog circuit theory, this new text will help engineers workng with digital systems shorten their latest design problems. The scope of the material covered includes signal reflection, crosstalk, and noise problems which occur in high speed digital machines ( above 10 megahertz). This volume will be of practical use to digital logic designers, sstaff and senior communitions scientist, and all those interested in digital design.
.... by Howard W., Ph.D. Johnson, Martin, Ph.D. Graham
C Programmer's Guide to Serial Communication
@ US$31.96
Revises and updates the first edition of 1987. An intermediate-to- advanced reference, leaning to the advanced,
about asynchronous serial communications as it is found on microcomputers. The first section presents the
theoretical and practical background information required to understand the objectives of the programming
section. Using the first section as a backdrop, the second section develops the programming tools to accomplish
everyday serial programming chores. The programming examples are in C. A companion diskette is available.
Annotation copyright Book News, Inc. Portland, Or.... by Joe Campbell
Serial Port Complete
@ US$31.96
Serial Port Complete is an accurate title. This book covers everything you'd ever want to know about
serial ports and network projects. And it's not all theory. This is a very practical book, full of
detailed examples - including Stamps and Visual Basic. This book is a "must-have" for serious experimenters
.... by Janet Louise Axelson, Jan Axelson
Parallel Port Complete: Programming, Interfacing & Using the PC'S Parallel Printer Port
@ US$31.96
chipm@netusa1.net from Kokomo, IN , 03/15/98, rating=10: Very thorough and informative.....good job as usual for
Jan. I have read Jan's columns for years in various electronics magazines and papers. She does not disappoint in
this book. She presents the subject of PC interfacing very thoroughly and with much detail. Her use of Visual
Basic was important so that the book would appeal and be usable to the most widest audience possible. Not everyone
is a C programmer so I think the book would be useful to all. The book cleared up many concepts for me. Very well
written... by Jan Axelson
Programming the Parallel Port: Interfacing the PC for Data Acquisition and Process Control
@ US$35.96
martinc@cs.athabascau.ca from Athabasca, Canada , 04/21/98, rating=10: What your PC must do to sieze the world by
the bits. This very up-to-date handbook reveals little-known secrets of PC hardware and the software needed to
control the outside world with a PC. Suitable background in electronics is given for the book to be used as a
textbook, yet the approach is that of a helpful cookbook. Going beyond the PC, the important topic of
microcontrollers is addressed. Best of all, important problems in data measurement using PCs can be addressed with
very inexpensive hardware easily built (a complete novice might need a Radio Shack style guide to how to do
soldering). Software is included in source code form on disk, an added bonus. Reading this book won't get you an
EE degree but it might be the next best thing... by Dhananjay V. Gadre
Usb Complete :
Everything You Need to Develop
Custom Usb Peripherals
@ US$39.96
- 398 pages Bk&Cd Rom edition (December 1999) ........ Jack Ganssle,Embedded Systems Programming, March 2000
This is a readable and comprehensive book that covers all aspects of actually building and coding USB devices.
Jan's description of building a HID-class peripheral is the best around. Test & Measurement World The author
has a flair for taking complicated information and making it readable, interesting, and informative. Joseph
J. Carr, Nuts & Volts, April 2000 Axelson has done it again. If you want to add USB to your repertoire, this
is the book for you... by Jan Axelson
USB Design by Example: A Practical
Guide to Building I/O Devices
@ US$49.99
The only hands-on guide to designing and implementing USB devices.
USB (Universal Serial Bus) is a new peripheral interconnect standard that was developed through a cooperative
computer industry initiative and now appears on all personal computers, desktop and laptop, shipped today. The
list of features of USB is long and impressive but when you try to discover HOW "hot-plug" or "automatic device
recognition and configuration" is implemented you discover that you have to read and understand... by John Hyde
USB Hardware & Software
@ US$94.95
This book describes the hardware, software, device, bus, and host controller details of the Universal
Serial Bus version 1.0. Our desire has been to expand on the technical information presented in the
official specification. We expect that you have a copy of the official specification, which should be
considered the final word on correct and required bus, device, and host controller behavior.
The focus of this book is to address the needs of developers creating USB device hardware/firmware...
by John Garney, Edward Solari, Shelagh Callahan, Kosar Jaff, Hosler
Inside PC Interfacing
@ US$47.96
Provides complete coverage of all PC interface methods including Parallel Port, Serial Port (RS-232),
I/O busses (ISA, PCI, IDE and SCSI), and the new USB. Includes experiments and practical "projects" along
with theoretical discussions of how different interfaces operate. Source code for all experiments provided
in 8086 assembler, Visual Basic, Visual C++, and LabView. Thorough coverage of creating Device Drivers
including Dynamic Link Libraries (DLLs) & Virtual Device Drivers (VxDs).... by Michael Predko, Myke Predko
Controlling the World With Your PC
@ US$28.00
Reviewer by : Ross Bolton from Santa Ana, CA
This book goes straight in to code, no connections or words about interface. Although he has lots of projects
and lots of code, including a disk, unless you know how to use cable connections from board to PC or PC to
whatever you are trying to control (he has a motor project) then you will be wasting your time with it. If
you are adventurous or know how to connect, then the book is generally pretty good. Has 40 projects which
vary quite a bit and the circuit schematics for some projects also. But definitely not for a beginner.
.... by Paul Bergsman
Motor Control Electronics Handbook
.... by Richard Valentine
@ US$76.61
Hardcover (April 1998) McGraw Hill Text; ISBN: 0070668108
Design reliable electronic controls for any motor application. If you design or test motor controls, count on
the applications-focused Motor Control Electronics Handbook for the high-quality, hands-on help you need to
work faster and smarter than ever. Richard Valentine's plain-English, state-of-the-art guide helps you design
motor controls with microcontrollers and IGBT power devices... gives you an in-depth introduction to digital
motor speed controls (with actual design examples and software...
Industrial Motor Control.... by Stephen L. Herman
@ US$68.95
This newly revised text, now in full color, provides easy-to-follow instructions and the essential
information for controlling industrial motors. Most commonly-used devices in contemporary industrial
settings are covered....
CAN System Engineering: From Theory to Practical Applications
.... by Wolfhard Lawrenz
@ US$79.95
Industrial engineers increasingly make use of microprocessors to monitor and control industrial processes.
This book provides a comprehensive account of how CAN (controller area network) can be designed and applied
in a wide...
CANopen Implementation : Applications to Industrial Networks
.... by Mohammad Farsi, et al
@ US$95.00
Fundamentals of Programmable Logic Controllers, Sensors, and Communications
.... by Jon Stenerson
@ US$110.00
Hardcover - 562pages 2 edition( Jun 98 ) Prentice Hall; ISBN: 0137461240
An introductory textbook on the fundamentals of industrial controllers which can also be used as a resource
for electricians and for electronics and manufacturing technicians. Chapters begin with a generic approach
to each concept, then give examples for specific controllers such as Allen-Bradley, Gould Modicon, Omron,
PLC Direct by Koyo, and Square D Corporation. Topics covered include embedded controllers, supervisory control
and data acquisition, fuzzy logic and radio frequency, and new programming techniques. The new edition has
expanded to include seven new chapters
Introduction to Programmable Logic Controllers
.... by Gary Dunning
@ US$66.95
Paperback - 433pp 1st Edn( Feb 98 )
Delmar Publishers; ISBN: 0827378661
This book offers an introduction to programmable logic controllers. It is a comprehensive source where the beginner
can learn what a programmable logic controller is, how it works, programming, editing, PLC interface, I/O module
selection and PLC hardware configuration. The extensive review questions at the end of each chapter and over 40
hands-on lab manual exercises give users the tools to learn the topic at hand. Features: -state-of-the-art
information on PLC's -thorough coverage of Allen-Bradley SLC 500 series controllers -extensive review questions
insures the reader has a solid grasp of materials presented in each chapter -hands-on exercises allow the reader to
learn by doing -current product photos and illustrations aid the visual learner ALSO AVAILABLE Lab Manual,ISBN:
0-8273-7867-X INSTRUCTOR SUPPLEMENTS CALL CUSTOMER SUPPORT TO ORDER Instructor's Manual, ISBN: 0-8273-7868-8
|
sale(at)blitzlogic.com